SCXI-1162 - NI | 32-Channel Digital I/O Module

Description

National Instruments SCXI-1162 32-Channel Optically Isolated TTL/CMOS Digital Input

Features: • 8 Banks of 4 Lines • 300 Vrms, Cat. II Working Isolation Per Bank • SCXI-1600 (USB) is Recommended for Controlling this Module; Also Compatible with M Series • 2,300 Vrms Transient Overvoltage Protection

The NI SCXI-1162 (Part Number: 776572-62) is an optically isolated Digital Input Module, which can interface to field digital logic signals where common-mode voltages may exist, such as TTL and CMOS. The SCXI-1162 can function well with the National Instruments MIO-16 and AT-MIO-64F-5 boards; Lab-NB, Lab-PC, Lab-PC+, Lab-LC, and PC-LPM-16 boards; and with the DIO-24, DIO-32F, and DIO-96 boards. It is possible to control more than one NI SCXI 1162 module in one chassis with a single data acquisition board. Additionally, the SCXI-1326 shielded terminal block can be used with this module for direct signal attachment with screw terminals. It has 32 channels, a reference voltage range of +5 to +10 V, an input impedance of 360, and a serial data rate of 580 reads per second. The back connector on the SCXI-1162 Digital I/O Module can be configured to transmit information from the inputs in parallel, or to create a serial communication link with the SCXIbus. The user can additionally configure the back connector to link to a DIO-type or an MIO-type data acquisition board. The user can set jumpers on the module to arrange the back connector. On the other hand, when the user is controlling the National Instruments SCXI-1162 module with the SCXIbus and not utilizing the back connector, the locations of the configuration jumpers do not matter. It is imperative to note that the module in the chassis which is cabled to a DAQ board must be arranged to enable reads from module registers. To be more specific, the module must be arranged to transmit information from the SCXIbus MISO line to the SERDATOUT pin of the module back connector. The NI SCXI-1162 comes with six jumpers that can be configured by the user and one reserved jumper. The SCXI-1162 is run using the NIDAQmx driver software which is compatible with software packages/application development environments (ADEs) such as LabVIEW, LabWindows/CVI, or Measurement Studio. The NI device measures 1.2 x 6.8 x 8.0 in. in physical dimensions.

                                                                                     SCXI-1162

                                                                                     SCXI-1162

                                                                                     SCXI-1162

[service contact information]

Purchase and consultation hotline: 15339537795 (same number on wechat)

QQ: 2645963284

E-mail: 2645963284 @qq.com

Contact Person: Miss Yuan

Company: Guizhou Yuanmiao Automation Equipment Co., LTD

Address: Hongshan Hotel, No.42 Hongshan Lake Road, Beijie Street, Xixiu District, Anshun City, Guizhou Province (Bailing. No. 9, 14th floor, Doubletree by Hilton

① 24-hour email reply (12 hours);

② For shipment to countries outside Asia, please contact the seller.

One year warranty, special discount after sale

The company focuses on DCS, PLC, robot, large servo four systems

The main products are all kinds of module/card, controller, touch screen, servo drive

The company's advantages: the supply of imported original products, professional production of accessories

Fast delivery time, complete supply, The seller has more than $1526000 worth of industrial control products inventory

We Can transport to the world！！！

Main brands include: ABB, Bailey, GE, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, EMERSON EMERSON, B&R, MOTOROLA, FUANC, REXROTH, KUKA, HONEYWELL, NI, DEIF, Yokogawa, WOODWARD WOODWARD, Ryan, SCHNEIDER SCHNEIDER, Yaskawa, MOOG, EPRO, PROSOFT and other major brands

[Disclaimer]

Guizhou Yuanmiao Automation Equipment Co., LTD. We sell new products and discontinued products, independent channels to purchase such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products on this website. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Descriptions, descriptions or sales of products bearing these names, pictures, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder.

National Instruments Related Products

This article is from the official website of Guizhou Yuanmiao Automation Equipment Co., LTD. Please attach this link: http://www.ymdcs.com/