IS420UCSBH4A | GE Controller Module

Description

SPECIFICATIONS

Part Number: IS420UCSBH4A
Manufacturer: General Electric
Country of Manufacture: United States (USA)
Series: Mark VIe
Function: UCSB Controller
Microprocessor; 600MHz Intel
Memory: 256 MB DDR2 SDRAM
Operating System: QNX Neutrino
Availability: In Stock

IS420UCSBH4A is a Controller Module manufactured by General Electric as part of the Mark VIe Series used in gas turbine control systems with a 1066 MHz Intel EP80579 microprocessor. The application code is executed by standalone computers called UCSB controllers. Through on-board 1/0 network (IONet) interfaces, the controller mounts in a panel and communicates with the I/O packs. Only Mark controls I/O modules and controllers are supported by the private, special-purpose Ethernet network known as IONet. The controller's operating system (OS) is QNX Neutrino, a real-time, multitasking OS developed for industrial applications requiring great speed and dependability. The UCSB controller lacks any application I/O hosts, in contrast to conventional controllers that host application I/O on a backplane. Additionally, each controller has access to all I/O networks, providing them with all input data.

If a controller is turned down for maintenance or repair, the hardware and software architecture ensures that no single point of application input is lost. Functional safety loops are implemented to achieve SIL 2 and 3 capabilities using the Mark VIeS UCSBSIA Safety controller and Safety 1/0 modules. Operators who are familiar with SIS applications employ Mark Vles Safety equipment to lower risk in crucial safety functions. These particular control hardware and software have IEC 61508 certification and are specifically configured for work with safety controllers and distributed I/O modules.

The UCSB Controllers offer the Following Advantages:

• Single module
• Built-in power supply
• No jumper settings required
• No battery
• No fan (UCSBSIA, UCSBHIA, UCSBH4A)
• Dual-redundant fans with IS420UCSBH3A
• Smaller panel footprint
• Flash memory can be conveniently updated

UCSB INSTALLATION:

A single module that installs directly to the sheet metal of the panel contains the controller. The dimensions for the module envelope and mounting are shown in the diagrams below. Every measurement is in inches. The UCSB must be attached to the panel as depicted, with the vertical airflow through the fins remaining unhindered.

Fig 1: H4A Envelope and Mounting Dimensions

The following communication ports provide links to I/O Operator and engineering interfaces from the Mark VIe Controller.

Fig 2: Typical Ethernet COnnections

UCSB SOFTWARE AND COMMUNICATION:

Software customized for the controller's use is installed. Rungs or blocks can be run by it. Without needing to restart, small changes to the control software can be done online. The clocks of the 1/O packs and controllers are synchronized within 100 microseconds using the IEEE 1588 protocol via the R, S, and T IONets. Through the R, S, and T IONets, external data is sent to and received from the control system database in the controller. This comprises the 1/0 modules' process inputs and outputs.

Additionally, in a dual system, these are:

1. Data on initialization and internal state variables from the selected controller
2. Information on the synchronization and status of both controllers

This also covers the following in a triple modular redundant (TMR) system:

• Information on synchronization from all three controllers, internal state values for voting, and status

• Initialization data from the chosen controller

UCSB BOOT LED:

In the absence of a mistake, the boot LED remains on throughout the boot process. The LED will blink once per second (Hz) if an error is found. The LED blinks for 500 milliseconds, then goes off. The LED stays off for three seconds after the flashing phase. Flash count reveals failed condition.

Fig 3: UCSB LEDs and Connections

The boot LED flashes continuously at a Hz rate if the flash image is genuine but the runtime firmware has not yet been loaded. The firmware loads and the boot LED goes off. Use the ToolboxST app to find out why the controller is blocked if it won't connect online. After receiving an IP address, ToolboxSTplication configures itself over Ethernet.

Main brands include: ABB, Bailey, GE, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, EMERSON EMERSON, B&R, MOTOROLA, FUANC, REXROTH, KUKA, HONEYWELL, NI, DEIF, Yokogawa, WOODWARD WOODWARD, Ryan, SCHNEIDER SCHNEIDER, Yaskawa, MOOG, EPRO, PROSOFT and other major brands

GE Fanuc Related Products

【 Disclaimer 】 We sell new products and discontinued products, independent channels to buy such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, dealer or representative of the products featured on this website. All product names/product images, trademarks, brands and microlabels used on this Website are the property of their respective owners. Descriptions, depictions or sales of products with such names/images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder. This article is from the official website of Guizhou Yuanmiao Automation Equipment Co., LTD. Please attach this link:http://www.ymdcs.com/GE/