DS200UDSAG1ADE | GE General Electric exciter board

Description

The General Electric excitation board DS200UDED1 features a 180196 microprocessor and several erasable programmable read-only memory (EPROM) modules. Ge's exciter board DS200UDSAD also comes with a 214-character display and 32 leds. Because the board is full of microprocessors, the board and the driver must work in a well-ventilated environment. The surrounding environment must also be clean, free of dust, dirt and oil. To create a clean and cool environment, the location you choose to install the drive is the first and most important consideration. To choose a location, consider that the other drives and devices are far enough away that they will not cause excessive temperatures. The drive must also be well ventilated, and in some cases fans are necessary for cooling the site. If you use fans, make sure they are in good condition and fit the size of the space. Cooling air enters the drive through a vent hole at the bottom of the drive. Air passes through the drive, removing heat from the components. At the top of the drive, hot air exits from the drive. When you plan the installation, if the walls around him are hot. Drives and other devices in adjacent rooms may heat the walls. You can consider choosing another space to install the drive in, or using the drive when other devices are not in use. In this way, the walls will become cooler without causing too much heat.

The communication module of the programmable controller is equivalent to the network interface in the local area network. The communication module data bus is connected with the host of the programmable controller, and the communication protocol is realized by hardware and software together. The communication module of the programmable controller is generally equipped with several interfaces, which can be selected through the selection switch on the communication module to realize the communication with other programmable controllers, intelligent control devices or computers. The input module is used to receive and collect the input signal. The input signal has two types: one is the switch input signal provided by the button switch, the stroke switch, the digital dip switch, the proximity switch, the photoelectric switch, the pressure relay, etc. The other is a continuously changing analog input signal sent by potentiometer, thermoelectric, tonometer motor, and various transmitters. The input module also needs to convert these different level signals into digital signals that the CPU can receive and process. The function of the output module is to receive the digital signal processed by the central processor, and convert it into a signal that can be received by the field executive parts, which is used to control the contactor, solenoid valve, regulating valve, speed regulating device, etc. Another type of load control is the indicator light, digital display and alarm device.

It is an electronic power supply board, mainly used to supply the electric energy required by the excitation system of the power generator. The excitation system of electric generator is an important part of electric power plant, which is used to control the output voltage and current of electric generator to maintain the stability of electric power system. Features and functions: This exciter source board may have the following characteristics and functions: Power output: It provides the power supply voltage and current required by the excitation system to ensure that the generator can produce a stable power output. Voltage regulation: The exciter source board usually has a voltage regulation function to adjust the output voltage of the power generator as needed. Overcurrent protection: To protect the excitation system from current overload, the power supply board may include overcurrent protection. Communication interface: Some exciter source boards may have a communication interface for communication and data transfer with the generator control system or monitoring system. High reliability: Considering the criticality of electric power plants, this type of power supply board usually has high reliability and stability.

The company focuses on DCS, PLC, robot, large servo four systems

The main products are various modules/cards, controllers, touch screens, servo drivers Company advantage: Supply imported original products, professional production of spare parts One year warranty, fast delivery time, complete supply !！！ ① 24 hours email response (12 hours); ② For shipment outside Asia, please contact the seller.

General Electric Related Products

【 Disclaimer 】 We sell new products and discontinued products, independent channels to buy such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, dealer or representative of the products featured on this website. All product names/product images, trademarks, brands and microlabels used on this Website are the property of their respective owners. Descriptions, depictions or sales of products with such names/images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder. This article is from the official website of Guizhou Yuanmiao Automation Equipment Co., LTD. Please attach this link:http://www.ymdcs.com/GE/