3500/15-02-02-00 | Bently Nevada | Power Supply

Description

The 3500/15 AC and DC Power Supplies are half-height modules andmust be installed in designated slots on the left side of the rack. The3500 rack can contain one or two power supplies with any combinationsof AC and DC. Either supply can power a full rack. When two power supplies are installed in a rack, the one in the lowerslot acts as the primary supply, and the other in the upper slot acts asthe backup supply. If installed, the second supply is the backup for theprimary one. Removing or inserting either power supply module does not disruptoperation of the rack as long as a second power supply is installed. The 3500/15 AC and DC Power Supplies accepts a wide range of inputvoltages and converts them to voltages acceptable for use by other3500 modules. The following power supplies are available with the 3500Series Machinery Protection System: Universal AC Power High Voltage DC Power Supply Low Voltage DC Power Supply

• Manufacturer : Bently Nevada

• Product No. : 3500/15-02-02-00

• Product Type : Power Supply

• Made in U.S.A 

• Power Supply Type (Top Slot) : 02 = High Voltage AC (175 to 264 Vac rms)

• Power Supply Type (Bottom Slot) : 02 = High Voltage AC (175 to 264 Vac rms)

• Agency Approval : 00 = None

• Weight : 1.39 Kg

• Shipping Weight : 3 Kg

Bently Nevada is a supplier of products and services for evaluating and ensuring the mechanical and thermodynamic performance of industrial equipment. The company has 100 offices in 43 major industrial centers. It has more than 25,000 users in power generation, petrochemicals and many other industries. The monitoring system is used to receive signals from a variety of sensors and continuously monitor and display important machine parameters. When the mechanical state exceeds the user-set boundary, an alarm signal is triggered. These alarm signals can automatically shut down and/or warn operators and others in the plant of mechanical failure. Optional data acquisition hardware provides a link between the mechanical protection System and our System 1 condition monitoring software. Product information about our mechanical protection systems (3500,1701,3300 and 1900) and our data acquisition hardware (e.g. DI,DDI,TDXnet, etc.) is included in this section. Bentley Bently sensors are typically installed inside or on the surface of machines to measure vibration, displacement, speed, pressure, torque and energy. Bentley Nevada offers a wide range of sensors that meet the requirements of industrial environments, some of which can be installed in hazardous areas with intrinsic safety barriers, electromagnetic insulation, etc. If your needs are not within our standard range of products, we can also modify existing products, or develop completely new products to meet your needs. Bentley 3500/15-05-05-00 Power Supply available on order - AC/DC input power supply with a range of voltage source compatibility. Line noise filters are standard, and 3500 racks can be powered by a single power supply, or dual power supplies can provide redundancy without allowing power outages. Dual power supplies are located above and below most left rack slots. Redundant power supplies can use separate voltage sources. For example, the base (bottom) provides running 120 volt power, while the backup (top) provides uninterrupted 24 volt DC power. Each power supply can individually power the entire rack and its modules. When the redundant power supply is used, one power supply is used as a primary power supply, and the other is used as a backup power supply, which is used as a power supply for the host chassis, ready to run automatically at any time, without interrupting the function of the rack, and should be used as a primary power supply. The 3500/15 power module has a self-monitoring function to determine whether its output voltage is within the standard range. The module is displayed through the green front panel, indicating that the upcoming LED power supply is "in good supply." Bentley Power module 3500/2015-05-05-00

The Bentley 3500/15 power module is a half-height module. The Bentley 3500/15 power module (card) must be installed in a specially designed groove on the left side of the frame. The 3500 frame can be equipped with one or two power supplies (any combination of AC or DC). Any one of these sources can power the entire frame. If two power supplies are installed, each can act as a backup to the other. When two power supplies are installed, the upper power supply is the active power supply, and the lower power supply is the standby power supply. If a power module is installed, removing or installing a power module does not affect the normal running of the enclosure. The 3500 power supply can accept a wide range of input voltages and convert the input voltage into a voltage acceptable to other 3500 modules. For the 3500 mechanical protection system, there are three power supplies:

Ac power supply 175 ~ 264 volts, (usually 220V) AC power supply ◆ High voltage DC power supply ◆ Low voltage DC power supply ◆ Operating temperature :-30°C to +65°C(-22°F to +150°F). ◆ Storage temperature :-40°C to +85°C(-40°F to +185°F) ◆ Humidity :95%, non-condensing. ◆ Order information 3500/15-AXX-BXX-CXX ◆ Common model :3500/15-02-00/3500/15-02-00/3500/15-05-05-00 ◆ Common spare parts :127610-01, 125840-01; Bently3500 frame instrumentation system includes: Power module 3500/15-05-05-00 Power module 3500/15-05-05-00 Power module 3500/15-05-05-00 Power module 3500/15-05-05-00 Power module 3500/15-05-05-00 Power module 3500/15-05-05-00 Power module 3500/15-05-05-00 Power module 3500/15-05-05-00 Power module 3500/15-05-05-00

The company focuses on DCS, PLC, robot, large servo four systems

The main products are various modules/cards, controllers, touch screens, servo drivers Company advantage: Supply imported original products, professional production of spare parts One year warranty, fast delivery time, complete supply !！！ ① 24 hours email response (12 hours); ② For shipment outside Asia, please contact the seller.

Bently Nevada Related Products

【 Disclaimer 】 We sell new products and discontinued products, independent channels to buy such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, dealer or representative of the products featured on this website. All product names/product images, trademarks, brands and microlabels used on this Website are the property of their respective owners. Descriptions, depictions or sales of products with such names/images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder. This article is from the official website of Guizhou Yuanmiao Automation Equipment Co., LTD. Please attach this link:http://www.ymdcs.com/BentlyNevada/