SCXI-1308 -NI Current Input Terminal Block

Description

The SCXI-1308 (Part Number: 777687-08) 32-Channel Terminal Block is shielded with 78 screw terminals that can be joined to the following modules: the SCXI-1102/B/C and the SCXI-1100 modules. There are 32 precision resistors of 249 Ω that can change current to voltage when measuring 0 to 20 mA and 4 to 20 mA process current sources. The SCXI module being used with the SCXI-1308 then measures the voltage, allowing the data acquisition board obtains the voltage. Thirty-two pairs of screw terminals can be joined to the 32 differential inputs of the SCXI modules. A single pair of terminals can be linked to the module’s chassis ground pins. Three terminals link to the SCXI module OUTPUT and AOREF pins, along with the SCXIbus guard. The remaining terminals are saved for operation in the future. To arrange and operate the NI SCXI 1308 Terminal Block, there are several required items: the Installation Guide, an SCXI chassis, the SCXI-1102/B/C or SCXI-1100 module, No. 1 and No. 2 Philips-head screwdrivers, and 1/10 inch and ¼ inch flathead screwdrivers. The installation process involves linking the Terminal Block to the SCXI module’s front connector, then tightening the bottom and top thumbscrews on the rear of the SCXI-1308 to make sure it is secure. The SCXI 1308 Current Input Terminal Block can convert current to voltage, then measure the voltage and the data acquisition board obtains the voltage. The voltage measured for a 4 to 20 mA current source will fall between 0.996 to 4.98 VDC. The NI SCXI-1308 has the capability to measure current and voltage sources. While measuring voltage signals, the user should remove the current-loop resistor for that specific input channel. It has channel-to-channel and channel-to-earth voltages of up to 30 Vrms and 42.4 Vpeak or 60 VDCs. The NI device has an operating temperature range of 0° to 50° C, a storage temperature range of –20° to 70° C, and a non-condensing relative humidity range of 5% to 90%.

High dynamic range, dynamic signal acquisition module PXI bus dynamic signal acquisition module, provides 8 analog signal synchronous input channels, ADC resolution 24bit, sample rate 204.8kSA /s, support AC/DC input coupling, each channel integrated independent IEPE excitation source. The interface type is SMB. peculiarity ◆ Sound and vibration test ◆24bit acquisition resolution, high dynamic range, high precision ◆ Adaptive anti-aliasing low-pass filter ◆IEPE excitation source Application program ◆ Dynamic structure test, sound/vibration test ◆ Speed sensor and microphone signal acquisition ◆ Audio amplifier and production instrument test ◆ Vibration table control, vibration analysis and machine condition monitoring ◆ Aerospace, aviation, shipping, nuclear power, automobile, research institutes

Flexible configuration, voltage, current analog output module PXI bus 32 analog signal output module, providing 32 analog signal output channels, DAC resolution 16 bits, refresh rate 40kS/s, each channel can be independently configured with voltage output or current output, while 8 auxiliary digital signal input and output, 2 32-bit multi-function counter. Connector Type DB-62 Female connector. peculiarity ◆ Flexible configuration, voltage output or current output ◆ Multiple output ranges are available ◆ Support static output and dynamic output ◆ Up to 32 synchronous outputs ◆ Programmable power-on output state ◆ Multi-function auxiliary IO (AuxIO) ◆ A variety of triggering methods Application program ◆ Simulation and control ◆ Automatic test and measurement ◆ Scientific research, design verification, manufacturing testing ◆ Aerospace, aviation, shipping, nuclear power, automobile, research institutes

The company focuses on DCS, PLC, robot, large servo four systems

The main products are various modules/cards, controllers, touch screens, servo drivers Company advantage: Supply imported original products, professional production of spare parts One year warranty, fast delivery time, complete supply !！！ ① 24 hours email response (12 hours); ② For shipment outside Asia, please contact the seller.

National Instruments Related Products

【 Disclaimer 】 We sell new products and discontinued products, independent channels to buy such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, dealer or representative of the products featured on this website. All product names/product images, trademarks, brands and microlabels used on this Website are the property of their respective owners. Descriptions, depictions or sales of products with such names/images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder. This article is from the official website of Guizhou Yuanmiao Automation Equipment Co., LTD. Please attach this link:http://www.ymdcs.com/NationalInstruments/