PCI-6515 -NI Digital I/O Device

Description

The PCI-6515 (Part Numbers: 778835-01, 778938-01) is a 32 Digital Input Channel, 32 Digital Output Channel Digital I/O Device by National Instruments. This low-cost, industrial Digital I/O Device has advanced features for industrial control, manufacturing test, and data acquisition applications. Part number 778938-01 refers to the PCI-6515 bundle kit. When powering up, the output drives on this device are incapacitated. All output lines are client configurable for an on or off state. Client configurable catalyst states are helpful for guaranteeing that the NI PCI 6515 powers up in a known state. To utilize the NI Measurement & Automation Explorer tool (prescribed) to program the catalyst states, select the gadget and tap the Properties button. The user can refer to the product documentation for data about how to program the catalyst states utilizing NI-DAQ with LabVIEW or other National Instruments application improvement situations. The user can program the NI PCI-6515 device to send an interrupt when a change happens on any information line. The DIO device can screen changes on chosen input lines or on all information lines. This device can screen for rising edges (0 to 1), falling edges (1 to 0), or both. When an information change happens, the DIO Device creates an interrupt and the NI-DAQ driver advises the product. The device has a voltage range of -30 V to 30 V. The DIO Device sends a change discovery when any of the progressions happen, yet it does not report which line changed or if the line was rising or falling. After a change, the user can read the info lines to decide the present line states. The greatest rate of progress location is dictated by the product reaction time, which differs from framework to framework. An overflow bit shows that an extra rising or falling edge has been distinguished before the product could process the past change. The PCI-6515 weighs 6.1 oz, and measures 6.3 x 3.9 in. in physical dimensions. It has recommended operating and storage temperature ranges of 0 °C to 55 °C and –20 °C to 70 °C, non-condensing operating and storage humidity ranges of 10% to 90% RH and 5% to 95% RH.

Optical coupler input, relay output, digital IO module PXI bus 48 digital input and output module provides 24 optical coupling isolated input channels, 24 solid-state relay isolated output channels, input channel level voltage is 80VDC high, output channel switching level is 80VDC high, switching current is 160mA high, the channels are isolated from each other. Connector Type SCSI-100 female connector. peculiarity ◆ Isolation between channels ◆24 optical coupler input ◆24 solid state relay output ◆ Maximum 80V input/output voltage range ◆ Programmable input filter to eliminate buffeting ◆ Switching current 160mA ◆ Relay on-resistance: 1ω ◆ Input change detection ◆ Programmable power-on status setting Application program ◆ Automotive, aviation, industrial monitoring applications ◆ Aviation and laboratory research ◆ Biochemical automatic test and measurement

Analog input module is a device used to collect and process analog signals, which is usually composed of analog input circuit, analog-to-digital converter (ADC), filter and interface circuit. The analog input circuit is responsible for converting the external analog signal into a voltage or current signal, and then converting the analog signal into a digital signal through an analog-to-digital converter, and finally filtering and enhancing the signal through a filter, and finally output to a computer or other control equipment for processing and analysis. Working principle 1. Analog input circuit: The analog input circuit is a key part of the analog input module, which is mainly responsible for converting the external analog signal into a voltage or current signal. Common analog input circuits include resistance divider circuit, current voltage circuit and so on. The resistance divider circuit realizes the signal conversion through the series parallel combination of resistors, and the current voltage circuit realizes the signal conversion through the product of current and resistance. 2. Analog-to-digital converter (ADC) : The analog-to-digital converter is the core component in the analog input module, which is responsible for converting analog signals to digital signals. The analog-to-digital converter discretizes the input voltage or current into a series of digital values according to its magnitude, and converts the continuous analog signal into a discrete digital signal through a process of sampling and quantization. Common analog-to-digital converters include successive approximation analog-to-digital converters and integral analog-to-digital converters. 3. Filter: The filter is an important part of the analog input module, which is mainly used to filter and enhance the signal. The filter can improve the quality and stability of the signal by removing high-frequency noise and interference signals, thus improving the accuracy and reliability of subsequent processing. 4. Interface circuit: The interface circuit is the connection bridge between the analog input module and the computer or other control equipment, which is responsible for converting the digital signal into a form that the computer or other control equipment can recognize and process. Interface circuit usually adopts serial communication interface or parallel communication interface, and realizes data exchange and communication with computer or other control equipment through data line and control line.

The company focuses on DCS, PLC, robot, large servo four systems

The main products are various modules/cards, controllers, touch screens, servo drivers Company advantage: Supply imported original products, professional production of spare parts One year warranty, fast delivery time, complete supply !！！ ① 24 hours email response (12 hours); ② For shipment outside Asia, please contact the seller.

National Instruments Related Products

【 Disclaimer 】 We sell new products and discontinued products, independent channels to buy such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, dealer or representative of the products featured on this website. All product names/product images, trademarks, brands and microlabels used on this Website are the property of their respective owners. Descriptions, depictions or sales of products with such names/images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder. This article is from the official website of Guizhou Yuanmiao Automation Equipment Co., LTD. Please attach this link:http://www.ymdcs.com/NationalInstruments/