Description
Fanuc A06B-6250-H030 power supply module. Manufactured from 2012 this aiPS 30HV is fitted on many machine tools throughout the world. Current ratings are 400VAC, 66amp and an output of 35kW. This module as all ai power supplies powers the amplifiers; assisting the displacment of regenerative load of the spindle motor when slowing/stopping. This drive has the A20B-2101-0820 pcb fitted. Further this module also powers the 24VDC circuit and DC bus bar for powering all of the spindles and servo amplifiers in the same drive circuit. DNC offer extensive testing on Fanuc ALPHA i Power modules, via either our 0i-TD or 0i-MD control system. We can ensure that fault finding and testing after repair is done properly rather than assuming that parts might work. Please check our Fanuc aiPS alarms page for error codes. The H030 belongs to the first series of High Voltage drives from the 62xx generation of Fanuc ALPHA i Power Supply Module, either as a PSM-30hvi or aiPS-30hv dependent on where the information has originated.
Power supply modules are power supplies that can be mounted directly on the printed circuit board. They are available in step-down and step-up formats, and provide power for application-specific integrated circuits (ASics), digital signal processors (DSPS), microprocessors, memory, field programmable gate arrays (FPgas), and other digital or analog loads.
1. DC/DC power module DC-DC is implemented with the idea of switching power supply. DC-DC has two types of buck and boost, here called buck. For example, enter 10V in DC-DC. The DC-DC has an internal oscillator and chopper module. For example, one time range allows 10V to pass, and the other time range does not allow 10V to pass (equal to 0v). On the other hand, if there is a capacitor at the output, and the capacitor is large enough, the result is a calculus of the pulse waveform in the middle, and the output is a DC waveform of 5V. Compared with the constant voltage module, the process of the step-down module to a greater extent to avoid the power consumption on the step-down module, the internal oscillation part by controlling its duty cycle, the output is constant (for example, in a DC-DC, the input range is 6V to 16V, the output is 5V, in the input range, the output is 5v, the error is only a few tenths of a volt. In addition, the output of the stability module has a certain linear relationship with the input voltage, and the output voltage difference between the input 7V and the input 14V is relatively large. Second, the use of power module advantages There are now many different Psus sold by different vendors in the market, but it is better to import Psus by product than to integrate solutions, because adopting Psus can save development time and bring products to market faster. The power module also has the following advantages: 1. Each unit can be rigorously tested individually to ensure high reliability products, including power-on testing to exclude products that do not meet specifications. In contrast, integrated solutions are difficult to test because the entire power system works closely with other functional systems on the circuit. 2. Different suppliers can design modules of the same size according to existing technical standards, providing various options for engineers designing power supplies. 3. Modules are designed and tested in accordance with standard performance regulations, so risks can be reduced by adopting new technologies. 4. If the integrated solution is used, the entire motherboard needs to be replaced when the power supply system fails. If a modular design is used, only the faulty module can be replaced, thus saving costs and development time.
Third, the characteristics of the power module
Small size and high reliability
Output stabilization, accuracy ±3%;
High performance cost ratio
Built-in multiple input and output voltages
Input filter, low electromagnetic compatibility
Aluminum alloy housing, frosted oxidized, six-sided shield.
Typical applications: industrial instrumentation, digital circuits, electronic communication equipment, satellite navigation, remote sensing and telemetry, ground communication scientific research equipment and so on.
Iv. Application scenario of the power module
1. Medical: Medical equipment, mainly including fetal protection instrument, monitor and so on
2. Industrial control: industrial control field
3. Military industry: The military industry is a very widely used aspect.
4. Electricity: there are mainly integrators and electricity meters and smart meters
Five, DC/DC power module several indicators
1, power P=UI, is the output voltage and output current product. The input voltage is divided into AC input and DC input 2 kinds. The output voltage is generally a DC output, but there are also AC outputs.
2, operating temperature isolation voltage: isolation is the output and input circuit separation. It has the following functions: first, current transformation; Second, in order to prevent input and output interference; Third, the signal characteristics of the input and output circuits are too different, such as the device package size of the weak signal to control the strong current has pins, patches, and spirals. There are single output, double output and multiple output.
The company focuses on DCS, PLC, robot, large servo four systems
The main products are various modules/cards, controllers, touch screens, servo drivers
Company advantage: Supply imported original products, professional production of spare parts
One year warranty, fast delivery time, complete supply !！！
① 24 hours email response (12 hours);
② For shipment outside Asia, please contact the seller.
【 Disclaimer 】 We sell new products and discontinued products, independent channels to buy such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, dealer or representative of the products featured on this website. All product names/product images, trademarks, brands and microlabels used on this Website are the property of their respective owners. Descriptions, depictions or sales of products with such names/images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder. This article is from the official website of Guizhou Yuanmiao Automation Equipment Co., LTD. Please attach this link:https://www.ymdcs.com/Fanuc/
