Description
Fanuc A06B-6114-H209 ALPHA i Servo Amplifier module. This aiSV-80/80 generation is a dual channel GE Fanuc ai series servo module. This module controls various ai motor models from ai8/4000, aiS12/4000 and aiS22/3000 servo motors. Amplifier includes the following PCB’s A16B-2203-0673 wiring board and A20B-2100-0741 control pcb. Neither of the boards is available seperately. The aiSV-80/80 is a 90mm wide servo module fitted with internal cooling fan and external fan on ext.heatsink. Being a twin axis servo module of the ai series its fitted with many combinations of other servo and spindle amplifiers dependent how many axes and spindles are actuating the machine tool. This drive has a rated output of 19A amp on each axis; containing two 100amp transistor modules. Fitted with wiring board A16B-2203-0673 and FSSB control card A16B-2100-074x and later A16B-2101-004x. None of the boards are available separate, but transistors, battery pack, fuses and the internal fan are.
The biggest characteristic element of AC servo motor is the servo mechanism. Can be called "servo motor", in addition to AC servo motor, there are DC servo motor and RC servo motor. The following explains their differences and characteristics, and briefly introduces the indispensable position/speed detection mechanism of servomechanism. Advantages of DC servo motor: (1) Small, light weight, high efficiency. (2) Suitable for low voltage work. (3) High efficiency/high power can be obtained by using high-performance permanent magnets. (4) The system price of motor and servo amplifier is low. (5) Through feedback, the basic performance such as rotation accuracy and positioning performance is very high. Disadvantages of DC servo motor: (1) To perform servo control according to the load. (2) There is brush wear, need maintenance. (3) Brush wear will produce dust, not suitable for clean environment. (4) will produce mechanical and motor noise. Coreless DC motor, many manufacturers use it for DC servo motor. The characteristics of coreless DC motor are as follows: (1) The rotor inertia is small. (2) The inductance of the motor coil is small and the rectification characteristics are good. (3) No slot torque is generated.
Power supply modules are power supplies that can be mounted directly on the printed circuit board. They are available in step-down and step-up formats, and provide power for application-specific integrated circuits (ASics), digital signal processors (DSPS), microprocessors, memory, field programmable gate arrays (FPgas), and other digital or analog loads.
DC/DC power module
DC-DC is implemented with the idea of switching power supply. DC-DC has two types of buck and boost, here called buck. For example, enter 10V in DC-DC. The DC-DC has an internal oscillator and chopper module. For example, one time range allows 10V to pass, and the other time range does not allow 10V to pass (equal to 0v).
On the other hand, if there is a capacitor at the output, and the capacitor is large enough, the result is a calculus of the pulse waveform in the middle, and the output is a DC waveform of 5V. Compared with the constant voltage module, the process of the step-down module to a greater extent to avoid the power consumption on the step-down module, the internal oscillation part by controlling its duty cycle, the output is constant (for example, in a DC-DC, the input range is 6V to 16V, the output is 5V, in the input range, the output is 5v, the error is only a few tenths of a volt. In addition, the output of the stability module has a certain linear relationship with the input voltage, and the output voltage difference between the input 7V and the input 14V is relatively large.
Advantages of using power modules
There are now many different Psus sold by different vendors in the market, but it is better to import Psus by product than to integrate solutions, because adopting Psus can save development time and bring products to market faster.
The power module also has the following advantages:
1. Each unit can be rigorously tested individually to ensure high reliability products, including power-on testing to exclude products that do not meet specifications. In contrast, integrated solutions are difficult to test because the entire power system works closely with other functional systems on the circuit.
2. Different suppliers can design modules of the same size according to existing technical standards, providing various options for engineers designing power supplies.
3. Modules are designed and tested in accordance with standard performance regulations, so risks can be reduced by adopting new technologies.
4. If the integrated solution is used, the entire motherboard needs to be replaced when the power supply system fails. If a modular design is used, only the faulty module can be replaced, thus saving costs and development time.
The company focuses on DCS, PLC, robot, large servo four systems
The main products are various modules/cards, controllers, touch screens, servo drivers
Company advantage: Supply imported original products, professional production of spare parts
One year warranty, fast delivery time, complete supply !！！
① 24 hours email response (12 hours);
② For shipment outside Asia, please contact the seller.
【 Disclaimer 】 We sell new products and discontinued products, independent channels to buy such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, dealer or representative of the products featured on this website. All product names/product images, trademarks, brands and microlabels used on this Website are the property of their respective owners. Descriptions, depictions or sales of products with such names/images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder. This article is from the official website of Guizhou Yuanmiao Automation Equipment Co., LTD. Please attach this link:https://www.ymdcs.com/Fanuc/
