Description
Transducer System The 3300 XL 8 mm Proximity Transducer System consists of: • a 3300 XL 8 mm probe • a 3300 XL extension cable • a 3300 XL Proximitor® Sensor1 The system provides an output voltage directly proportional to the distance betweenthe probe tip and the observed conductive surface. It is capable of both static(position) and dynamic (vibration) measurements, and is primarily used for vibrationand position measurement applications on fluid-film bearing machines, as well asKeyphasor® and speed measurement applications2. The 3300 XL 8 mm system represents our most advanced performance in an eddycurrent proximity transducer system. The standard 3300 XL 8 mm 5 metre systemis also 100% compliant with the American Petroleum Institute’s (API) 670 Standard(4th Edition) for mechanical configuration, linear range, accuracy, and temperaturestability. All 3300 XL 8 mm Proximity Transducer Systems achieve this level ofperformance while allowing complete interchangeability of probe, extension cable,and Proximitor® Sensor without the need for individual component matching orbench calibration.
Each component of the 3300 XL 8 mm Transducer System is backward compatibleand interchangeable3 with other non-XL 3300 series 5 and 8 mm transducer systemcomponents4. This includes the 3300 5 mm probe, which is used when an 8 mmprobe is too large for the available mounting space5,6.
Proximitor® Sensor The 3300 XL Proximitor® Sensor incorporates numerous improvements overprevious designs. Its physical packaging permits high-density DIN-rail installation.It can also be mounted in a traditional panel mount configuration, where it shares anidentical “footprint” to older 4-hole mounted Proximitor® Sensor designs. Themounting base for either option provides electrical isolation, eliminating the need forseparate isolator plates. The 3300 XL Proximitor® Sensor is highly immune toradio frequency interference, allowing installation in fiberglass housings withoutadverse effects from nearby radio frequency signals. Improved RFI/EMI immunityallows the 3300 XL Proximitor® Sensor to achieve European CE mark approvalswithout requiring special shielded conduit or metallic housings, resulting in lowerinstallation costs and complexity. The 3300 XL’s SpringLoc terminal strips require no special installation tools andfacilitate faster, more robust field wiring connections by eliminating screw-typeclamping mechanisms that can loosen. Proximity Probe and Extension Cable The 3300 XL probe and extension cable also reflectimprovements over previous designs. A patented TipLoc™molding method provides a more robust bond between theprobe tip and the probe body. The probe’s cable is moresecurely attached as well, incorporating a patentedCableLoc™ design that provides 330 N (75 lbf) pullstrength where the probe cable attaches to the probe tip. 3300 XL 8 mm Probes and Extension Cables can also beordered with an optional FluidLoc® cable option. Thisoption prevents oil and other liquids from leaking out of themachine through the cable’s interior.
Connectors
The 3300 XL probe, extension cable, and Proximitor®Sensor have corrosion-resistant, gold-plated ClickLoc™connectors. These connectors require only finger-tighttorque (connectors will "click"), and the speciallyengineered locking mechanism prevents the connectorsfrom loosening. They do not require any special tools forinstallation or removal.
3300 XL 8 mm Probes and Extension Cables can also beordered with connector protectors already installed.Connector protectors can also be supplied separately forinstallation in the field (such as when the cable must be runthrough restrictive conduit). Connector protectors arerecommended for all installations and provide increasedenvironmental protection7.
Extended Temperature Range Applications
An Extended Temperature Range (ETR) Probe andExtension Cable are available for applications where eitherthe probe lead or extension cable may exceed the 177 °C(350 °F) temperature specification. The ExtendedTemperature Range Probe has an extended temperaturerating for up to 260 °C (500 °F) for the probe lead andconnector. The probe tip must remain below 177 °C (350°F). The Extended Temperature Range Extension Cable isalso rated for up to 260 °C (500 °F). Both the ETR probeand cable are compatible with standard temperatureprobes and cables. For example, you can utilize an ETRprobe with the 330130 extension cable. The ETR systemuses the standard 3300 XL Proximitor Sensor. Whenusing any ETR component as part of your system, theaccuracy is limited to the accuracy of the ETR system.
The company focuses on DCS, PLC, robot, large servo four systems
The main products are various modules/cards, controllers, touch screens, servo drivers
Company advantage: Supply imported original products, professional production of spare parts
One year warranty, fast delivery time, complete supply !！！
① 24 hours email response (12 hours);
② For shipment outside Asia, please contact the seller.
【 Disclaimer 】 We sell new products and discontinued products, independent channels to buy such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, dealer or representative of the products featured on this website. All product names/product images, trademarks, brands and microlabels used on this Website are the property of their respective owners. Descriptions, depictions or sales of products with such names/images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder. This article is from the official website of Guizhou Yuanmiao Automation Equipment Co., LTD. Please attach this link:http://www.ymdcs.com/BentlyNevada/
