Description
PLC analog input module (analog input module), also known as A/D module, converts the continuous analog signal generated by the sensor detection in the field into the digital quantity that the PLC CPU can receive, generally 12-bit binary number, the more digital quantity modules, the higher the resolution. PLC analog output module. The analog output module, also known as D/A module, converts the digital quantity sent by the PLC CPU to the analog output module into the analog quantity (voltage or current) that can be received by the external device. The digital signal received by the analog output module is generally 12-bit binary number, and the more digital quantity modules, the higher the resolution. The digital module is to detect the state of the external switching input. Digital input and output signal is the switching signal, 0 or 1, analog signal, there are two, voltage or current signal, generally the signal transmitted by the transmitter, such as the pressure transformer to detect the pressure of the water pipe, it will output an analog signal 4-20ma or 0-10V signal to the PLC, PLC for data processing, This is the difference between a digital input module and an analog input module.
servo drives (servo drives), also known as "servo controller", "servo amplifier", is a controller used to control the servo motor, its role is similar to the frequency converter acting on the ordinary AC motor, is a part of the servo system, mainly used in high-precision positioning system. Generally, the servo motor is controlled through three ways of position, speed and torque to achieve high-precision transmission system positioning, and it is currently a high-end product of transmission technology. In the speed closed loop of servo drive, the real-time speed measurement accuracy of motor rotor is very important to improve the dynamic and static characteristics of speed control of speed ring. In order to find the balance between measurement accuracy and system cost, incremental photoelectric encoder is generally used as the speed measurement sensor, and its corresponding common speed measurement method is M/T speed measurement. Although M/T velocity measurement method has a certain measurement accuracy and a wide measurement range, but this method has its inherent defects, including: 1) the speed measurement cycle must detect at least one complete code pulse, limiting the minimum measurable speed; 2) The timer switches of the two control systems used for speed measurement are difficult to maintain strict synchronization, and the accuracy of speed measurement cannot be guaranteed in the measurement occasions with large speed changes. Therefore, it is difficult to improve the performance of servo drive speed following and control by using the traditional speed loop design method. Servo driver principle: At present, the mainstream servo drivers all use digital signal processor (DSP) as the control core, which can realize more complex control algorithms, and realize digitalization, networking and intelligence. Power devices generally use intelligent power module (IPM) as the core design of the drive circuit, IPM internal integrated drive circuit, and has overvoltage, overcurrent, overheating, undervoltage and other fault detection protection circuit, in the main circuit also add a soft start circuit to reduce the impact of the start process on the driver.
Embedded Microcontroller Unit (MCU) is a typical representative of the single chip microcomputer, from the late 1970s to today, although it has been more than 20 years of history, but this 8-bit electronic device still has an extremely wide range of applications in embedded devices. The MCU chip integrates ROM/EPROM, RAM, bus, bus logic, timing/counter, guard dog, I/O, serial port, pulse width modulation output, A/D, D/A, Flash RAM, EEPROM and other necessary functions and peripherals. Compared with embedded microprocessors, the biggest feature of microcontrollers is monolithic, the volume is greatly reduced, so that power consumption and cost are reduced, and reliability is improved. Microcontroller is the mainstream of embedded system industry. The on-chip peripheral resources of the microcontroller are generally rich and suitable for control, so they are called microcontrollers. Due to the low price and excellent function of the MCU, it has the most varieties and quantities, and the more representative ones include 8051, MCS-251, MCS-96/196/296, P51XA, C166/167, 68K series and MCU 8XC930/931, C540, C541. And there is support for I2C, CAN-Bus, LCD and many dedicated MCUS and compatible series. MCUS account for about 70% of the embedded systems market. The Avr microcontroller produced by Atmel has a high cost performance due to its integration of FPGA and other devices, which is bound to promote the higher development of microcontroller.
The company focuses on DCS, PLC, robot, large servo four systems
The main products are various modules/cards, controllers, touch screens, servo drivers
Company advantage: Supply imported original products, professional production of spare parts
One year warranty, fast delivery time, complete supply !！！
① 24 hours email response (12 hours);
② For shipment outside Asia, please contact the seller.
【 Disclaimer 】 We sell new products and discontinued products, independent channels to buy such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, dealer or representative of the products featured on this website. All product names/product images, trademarks, brands and microlabels used on this Website are the property of their respective owners. Descriptions, depictions or sales of products with such names/images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder. This article is from the official website of Guizhou Yuanmiao Automation Equipment Co., LTD. Please attach this link:http://www.ymdcs.com/other_brand/
