SE4304T01 - DeltaV AO 4-20 mA HART

Description

Specifications

Sensor Types：4 to 20 mA with or without HART, 0 to 20 mA Nominal Signal Range (span)：4 to 20 mA, (0 to 20 mA option) Full Signal Range：0 to 24 mA Accuracy over temperature range：0.25% of span (0 to 60°C), 0.5% of span (-40 to 70°C) Resolution：16 bit D/A converter Calibration：None Required Avaliable Field Power：20 mA at 15 V DC supply into 750 Ω load Field Circuit Protection：24 mA Current Limiting Circuit, Field wiring disconnect CHARM Power req.：42 mA max @ 24 V DC CHARM Heat Dissipation：0.48 W HART Support：HART v7 pass-through for AMS, HART v7 variable and device status available to control HART Data Update Rates：Update rates are faster than every second dependent on HART communication loading and device type

DeltaV™ Electronic Marshalling delivers a new level of controlsystem I/O performance with unprecedented flexibility andease of use. The CHARM I/O card (CIOC) supports up to96 individually configurable channels and when mountedhorizontally in conjunction with a legacy system migrationwill allow for direct replacement of legacy hardware withinexisting cabinets. Now you can migrate to DeltaV withouthaving to add cabinets, custom cables, or extra marshalling.All communications are completely redundant from thechannel (CHARM) to the DeltaV controller. • I/O anywhere you need it • Single channel granularity • Replaces legacy I/O in place • Fully redundant architecture • Complete DeltaV™ solution • Plug and play I/O Benefits I/O anywhere you need it: The DeltaV CIOC providesunprecedented flexibility in control system I/O topology.Now you can mount your DeltaV I/O in the same space as yourlegacy I/O for a direct 1-to-1 replacement. Without addingany new cabinets of DeltaV hardware you can replace all yourlegacy equipment leaving behind a complete DeltaV solution. Single Channel granularity: The CHARM I/O architectureallows each individual channel to be characterized for therequirements of the field device. Any instrument signal can bewired to any terminal block. The channel is then electronicallymarshalled by installing the appropriate CHARM and assigningthe channel to one of four controllers. Legacy I/O terminationsare no longer a concern because of multiple channel typesfrom a single termination panel. Just install the proper CHARMto characterize the I/O as found on the legacy panels. No moreengineering and splitting signals from a single legacy panel tomultiple DeltaV I/O cards. Replaces legacy I/O in place: DeltaV Electronic Marshallinggoes where no one else’s I/O can. Install the CHARMs migrationpanel above, below, or even in front of your legacy terminationpanel and move your wires inches to complete your migrationto DeltaV. Since the CHARMs migration panel is a standardCHARMs baseplate, it talks to the CIOC the same as thestandard vertical installation through the cable interface.This allows you to mount the migration panel in the bestlocation to facilitate a clean system cutover and not have to“stretch” your I/O cables to a new termination. As an addedbonus, install CHARMs vertical if your wiring allows for it incertain areas. Now you can mount your I/O in any orientationas best fits your current migration layout and needs.

Main brands include: ABB, Bailey, GE, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, EMERSON EMERSON, B&R, MOTOROLA, FUANC, REXROTH, KUKA, HONEYWELL, NI, DEIF, Yokogawa, WOODWARD WOODWARD, Ryan, SCHNEIDER SCHNEIDER, Yaskawa, MOOG, EPRO, PROSOFT and other major brands

The company focuses on DCS, PLC, robot, large servo four systems

The main products are various modules/cards, controllers, touch screens, servo drivers Company advantage: Supply imported original products, professional production of spare parts One year warranty, fast delivery time, complete supply !！！ ① 24 hours email response (12 hours); ② For shipment outside Asia, please contact the seller.

Emerson Related Products

【 Disclaimer 】 We sell new products and discontinued products, independent channels to buy such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, dealer or representative of the products featured on this website. All product names/product images, trademarks, brands and microlabels used on this Website are the property of their respective owners. Descriptions, depictions or sales of products with such names/images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder. This article is from the official website of Guizhou Yuanmiao Automation Equipment Co., LTD. Please attach this link:http://www.ymdcs.com/EMERSON/