SS4307T01 - DeltaV™ LS IS AI 4-20 mA HART

Description

Specifications

Sensor Types：4-20 mA with or without HART. Supports two-wire and four-wire device types Nominal Signal Range (span)：4-20 mA, (0-20 mA optional) Full Signal Range：0 to 22 mA Input Impedance：<303 Ω Field Power (2-wire)：16.0 V(min) at 20 mA Accuracy over temperature range：0.1% of span (0-60°C), 0.25% of span (over -40 -70°C) Repeatability：0.05% of span Resolution：16 bit A/D converter CHARM Power req.：60 mA max @ 24V DC ±10% CHARM Heat Dissipation：0.86 W Calibration：None required Isolation：Galvanically isolated according to EN 60079-11. Voltage peak value 375V DC. HART support：HART v7 pass-through for AMS, HART v7 variable and device status available to control HART Data Update Rates：Update rates are faster than every second dependent on HART communication loading and device type

DeltaV™ Electronic Marshalling delivers a new level of controlsystem I/O performance with unprecedented flexibility andease of use. The CHARM I/O card (CIOC) supports up to96 individually configurable channels and when mountedhorizontally in conjunction with a legacy system migrationwill allow for direct replacement of legacy hardware withinexisting cabinets. Now you can migrate to DeltaV withouthaving to add cabinets, custom cables, or extra marshalling.All communications are completely redundant from thechannel (CHARM) to the DeltaV controller. • I/O anywhere you need it • Single channel granularity • Replaces legacy I/O in place • Fully redundant architecture • Complete DeltaV™ solution • Plug and play I/O

The Migration CHARM baseplate assembly has a height of3 EIA units (5.25 inches) which allows for each installationto determine the mounting location within each cabinet.The user can decide to reuse existing wire way / cable tray,mount each assembly adjacent to each other, or mount withspacing between each assembly. DeltaV CHARMs allow forinstallation flexibility by allowing each assembly to be mountedas needed to achieve the best result for each customer-specifictermination installation. Each CHARM acts as a circuit protection device and field wiringdisconnects. Signals are current limited or fused to protectagainst wiring faults to ground. Each CHARM provides surgeprotection to meet industry standards in the area of EMC, and isdesigned to fail during overvoltage conditions due to incorrectfield wiring. Signal faults are isolated to the single CHARM. CHARMs can be partially ejected to a locked position thatdisconnects the field wiring from the system to perform fieldmaintenance actions or to remove power to a field device.Activating the CHARM latch ejects the CHARM to the detentposition. Closing the latch locks the CHARM in place andisolates the field wiring for field work. The CIOC communicates over Ethernet with up to fourcontrollers, allowing great flexibility and ease of systemexpansion. Additional controllers can be added toaccommodate increased control scope and I/O can bereassigned without changing the physical wiring. This allowsyou the flexibility required in migrations where over timeI/O has been landed on one controller only to be used inanother because of space and or available I/O.

Main brands include: ABB, Bailey, GE, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, EMERSON EMERSON, B&R, MOTOROLA, FUANC, REXROTH, KUKA, HONEYWELL, NI, DEIF, Yokogawa, WOODWARD WOODWARD, Ryan, SCHNEIDER SCHNEIDER, Yaskawa, MOOG, EPRO, PROSOFT and other major brands

The company focuses on DCS, PLC, robot, large servo four systems

The main products are various modules/cards, controllers, touch screens, servo drivers Company advantage: Supply imported original products, professional production of spare parts One year warranty, fast delivery time, complete supply !！！ ① 24 hours email response (12 hours); ② For shipment outside Asia, please contact the seller.

Emerson Related Products

【 Disclaimer 】 We sell new products and discontinued products, independent channels to buy such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, dealer or representative of the products featured on this website. All product names/product images, trademarks, brands and microlabels used on this Website are the property of their respective owners. Descriptions, depictions or sales of products with such names/images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder. This article is from the official website of Guizhou Yuanmiao Automation Equipment Co., LTD. Please attach this link:http://www.ymdcs.com/EMERSON/