3BSE023732R1 - Tension Controller

3BSE023732R1 - Tension Controller

Brand: ABB

Product ID: 3BSE023732R1

Condition: New / used

Terms of payment: Paypal、T/T 、Western Union

Category:

Description

General Information

    • Product ID:EXC3BSE023732R1
    • ABB Type Designation:PFVO 142 Exchange
    • Catalog Description:PFVO 142 Matching unit 25A, 1638 Hz

Additional Information

    • ABB Type Designation:PFVO 142 Exchange
    • Country of Origin:Sweden (SE)
    • Frame Size:Spare_Parts
    • Gross Weight:0.8 kg
    • Invoice Description:PFVO 142 Matching unit 25A, 1638 Hz
    • Made To Order:No
    • Medium Description:Matching Unit 25A
    • Minimum Order Quantity:1 piece
    • Order Multiple:1 piece
    • Package Level 1 Gross Weight:0.8 kg
    • Package Level 1 Units:1 piece
    • Part Type:Exchange
    • Product Name:Control System Accessory
    • Product Net Weight:0.8 kg
    • Product Type:Control_System_Accessory
    • Quote Only:No
    • Related Product ID:3BSE023732R1
    • Selling Unit of Measure:piece
    • Technical Information:PFVO 142 Matching Unit 25A. Exchange
      Note! The replaced part with RMA to be returned
      according to T&C otherwise an extra charge will be required.
    • WEEE Category:Product Not in WEEE Scope

公司介绍 (1).png

The Millmate Roll Force load cells act as integral parts of the mill stand. The rocksolid Pressductor® load cell design in combination with the intelligent, reliable communication functions are crucial keys to true roll force measurement. Due to its low impedance and high output signal power the Millmate Roll Force load cells has an extremely low sensitivity to insulation defects and maintains its measuring accuracy down to a 10Ωk insulation level. The load cell output signal is calibrated for full interchangeability between load cells of the same type and size. The various types and the wide load range cover practically all conceivable roll force measurement applications

Data

CIRCULAR LOAD CELLS
MEASURING RANGE 1.6 - 60 MN
TypePFVL 141C MRF Circular LC resource_small
Nominal load (MN)1.6, 2.5, 3.1, 4.0, 5.0, 6.3, 8.0, 10, 12.5, 14, 16, 18, 20, 22, 25, 28, 31, 35, 40, 45, 50, 51.5, 60


    RECTANGULAR LOAD CELLS
    MEASURING RANGE 0.63 - 56 MN
    TypePFVL 141VMRF Rectangular LC resource_small
    Nominal load (MN)0.63, 0.80, 1.0, 1.25, 1.6, 2.0, 2.5, 3.1, 4.0, 5.0, 6.3, 8.0, 10, 12.5, 14, 16, 18, 20, 22, 25, 28, 31, 35, 40, 45, 50, 56 


    ANNULAR LOAD CELLS
    MEASURING RANGE 2 - 28 MN
    TypePFVL 141RMRF Annular LC resource_small
    Nominal load (MN)2.0, 2.5, 3.1, 4.0, 5.0, 6.3, 8.0, 10, 11.2, 12.5, 14, 16, 18, 20, 22.4, 25, 28


    ALL LOAD CELLS
     
    Accuracy class (% of Fnom)± 0.5
    Linearity deviation (% of Fnom)≤± 0.5
    Hysteresis (% of Fnom)≤ 0.2
    Repeatability error (% of Fnom)≤ ± 0.1
    Compression (mm at Fnom)0.05
    Calibration error0.1 %
    Compensation for min. error+20 - +80°C
    Zero point drift≤ ± 0.01%/°C
    Sensitivity drift≤ ± 0.01%/°C
    Working temperature range-10 - +90°C
    Max. permitted short-term temp.+110°C
    Storage temperature range-40 - +90°C

    ABB.jpg

    Application ABB has many years of experience of installing load cells in all types of rolling mills. To achieve the best possible measurement results, certain basic rules must be observed during the installation of the load cell: The entire force must pass through the load cell. The force must be measured as close to the source of the force (the roll gap) as possible. The load cells must be protected to the greatest possible extent from large bending, lateral and torsional forces. Under the mill screw For installation under the mill screw, the load cell can be combined with thrust bearings and pressure plates into a package attached to the mill screw. This arrangement results in good force distribution, simple, inexpensive installation and easy servicing. In addition, there is no need to machine any surfaces on the roll stand. However, this arrangement does take up space in the roll window. Under the lower back-up roll bearing There must be a sufficiently large flat surface on the lower part of the roll stand to allow the installation of the load cell under the lower back-up roll bearing. This arrangement has the advantage that there is no need to pay particular attention to the load cell during roll change. See also our offer regarding Load Cell Packages to the right. Annular load cell between the mill nut and the mill stand This version makes measurement possible even if the space under the mill screw and under the lower back-up roll bearing is insufficient. This arrangement also has the advantage that there is no need to pay particular attention to the load cell during roll changing, and it is well protected.

    公司介绍 (5).png

    Main brands include: ABB, Bailey, GE, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, EMERSON EMERSON, B&R, MOTOROLA, FUANC, REXROTH, KUKA, HONEYWELL, NI, DEIF, Yokogawa, WOODWARD WOODWARD, Ryan, SCHNEIDER SCHNEIDER, Yaskawa, MOOG, EPRO, PROSOFT and other major brands

     

    The company focuses on DCS, PLC, robot, large servo four systems

    The main products are various modules/cards, controllers, touch screens, servo drivers Company advantage: Supply imported original products, professional production of spare parts One year warranty, fast delivery time, complete supply !!! ① 24 hours email response (12 hours); ② For shipment outside Asia, please contact the seller.


    ABB Related Products

    PM591 1SAP150100R0271PM860AK01 3BSE066495R1
    PM571 1SAP130100R0270PM861AK01 3BSE018157R1
    PM590 1SAP150000R0271PM861AK02 3BSE018160R1
    PM564 1SAP120900R0001PM856AK01 3BSE066490R1
    PM554 1TNE968900R0100PM851AK01 3BSE066485R1
    PM582 1SAP140200R0201PM866AK02 3BSE081637R1
    PM902F 3BDH001000R0001PM864AK01 3BSC840088R4


    【 Disclaimer 】 We sell new products and discontinued products, independent channels to buy such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, dealer or representative of the products featured on this website. All product names/product images, trademarks, brands and microlabels used on this Website are the property of their respective owners. Descriptions, depictions or sales of products with such names/images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder. This article is from the official website of Guizhou Yuanmiao Automation Equipment Co., LTD. Please attach this link:http://www.ymdcs.com/ABB/

    contact us