Description
The AKM22E-ANB2R-00 synchronous servomotor uses a resolver for feedback. This product is meant to be used at a temperature ranging from 5 °C to 40 °C. The device commissioning can be undertaken only by qualified personnel. This unit can trigger unfavorable consequences due to improper or incorrect wiring. It depicts an error message related to its temperature when the resolver connector is broken. The motor torque constant indicates the torque produced by the servomotor with 1 Arms current. This product portrays a rated power of 0.09 kW at 75 VDC. The device has a surface temperature of more than 100 °C when it is in the operating stage. This unit encompasses a flange that is designed according to IEC standards. It is equipped with a smooth shaft. The motor is largely used in machine tools. This product should never have a direct connection to the mains supply. The device must be free of shock especially at the shaft end when it is being transported. This unit houses ball bearings with grease around them. The servomotor should be checked for noise each year after every 2,500 operating hours. Its matt black finish is not resistant to solvents. The product does not support a retrofit action for the holding brake. This device associated resolver position is evaluated by the related servo amplifier. The unit has an electrically isolated thermistor that signals the temperature of the winding. Its stator is integrated with a three-phase winding that is driven by the stator. This motor must be free of condensation on its surface all the time. The product has an increased radial force if there is a power-off from the center of the free end of the shaft.
The AKM22E-ANBNR-00 is an AKM series brushless DC asynchronous servomotor from Kollmorgen. The manufacturer is recognized worldwide for its different categories of motors that meet almost any requirement. The device must be used along with a compatible SERVOSTAR series digital servo amplifier. It can be subject to a maximum of 145N radial load or 60N radial load at 5000 min-1 speed at shaft end. The standard unit has a winding type of E, a rotor length of 2 and a flange size of 2 or 58mm. The locking thread provided must be used to warm the drive components as well as to tighten pulley wheels, couplings or gear wheels. The motor couplings must be properly aligned to avoid unacceptable vibrations and destruction of bearings and couplings. The motor is designed for drives deployed in machine tools, industrial robots and packing or textile machinery. It must be installed as a component for electrical machines or apparatus. The device should never be connected directly to the mains supply. The unit comprises a smooth shaft and a flange designed as per IEC specifications. The synchronous motor has a rated power of 0.30kW and a rated speed of 3,500min-1 at 115V. The motor can work up to 95% relative humidity without condensation at rated values. The device can be mounted either horizontally or vertically. The unit experiences high radial forces if it is driven by toothed belts or pinions. It may tend to oscillate if the amplifier gain is very high or the shield of the resolver cable is broken. The device will not rotate when the motor phases are in the wrong sequence or when the servo amplifier is not enabled.
Features • 8 frame sizes, 28 frame/stack combinations • Speeds up to 8,000 RPM • 75 VDC; 120, 240, 480 VAC windings • A wide variety of feedback devices, mountings and seals • Direct mate to most Kollmorgen servo drives • Windings are rated at 100°C rise over a 40°C ambient while using 155°C (class F) insulation materials • cURus, CE Compliant, UL Recognition Options • Feedback devices: resolver, SFD, incremental and sine encoders • Seals for improved environmental protection • Shaft ends closed or open keyway, flat, smooth • Dual or single Intercontec connectors, straight or rotatable • 24 VDC fail-safe brakes • IP67 washdown versions with food-grade greases and finishes
The company focuses on DCS, PLC, robot, large servo four systems
The main products are various modules/cards, controllers, touch screens, servo drivers
Company advantage: Supply imported original products, professional production of spare parts
One year warranty, fast delivery time, complete supply !！！
① 24 hours email response (12 hours);
② For shipment outside Asia, please contact the seller.
【 Disclaimer 】 We sell new products and discontinued products, independent channels to buy such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, dealer or representative of the products featured on this website. All product names/product images, trademarks, brands and microlabels used on this Website are the property of their respective owners. Descriptions, depictions or sales of products with such names/images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder. This article is from the official website of Guizhou Yuanmiao Automation Equipment Co., LTD. Please attach this link:http://www.ymdcs.com/other_brand/
