1756-M02AE - Analog Motion Module

Description

Description: The 1756-M02AE is a ControlLogix Analog motion module. This module feature Two (2) axis for drives and actuators that require +/- 10VDC as velocity and Torque reference. This module has integrated Home limit switch inputs, Drive fault inputs, Drive enable outputs, 5V or 24V position registration inputs and 250 µs position and velocity loop updates.

Technical Specifications for 1756-M02AE

The Allen-Bradley 1756-M02AE is an analog encoder (AE). This module has two axes and a quadrature-position feedback output. This module controls drives or actuators that need either a +/- 10V velocity or a torque reference input. It ensures that the actuator (motor) follows the profile by monitoring the position feedback via the quadrature encoder input. It also generates an analog command reference for the drive. The 1756-M02AE module functions with several quadrature-output rotary and linear transducers. It can be mounted to a ControlLogix chassis, including the 1756-A4, 1756-A7, 1756-A10, 1756-A13, and the 1756-A17, but it requires an RTB, or Removable Terminal Block. The 1756-TBCH or the 1756-TBS6H RTB are both compatible this module, and they can be installed in any available slot of the chassis. Ground the chassis and power supply before installing the module with the RTB to the chassis. It has a loop update rate of 500 microseconds for the position and 250 microseconds for the velocity. Its drive model time constant is 15 microseconds and it has a torque loop bandwidth of 106 Hz. The 1756-M02AE module also has home limit switch inputs, drive fault inputs, and drive enable outputs. Three direct connections are possible with the 1756-M02AE module. Its servo loop type is a nested PI digital position and velocity servo. Its gain resolution is a 32-bit floating point at a rate of 5 kHz. Its absolute position range is +/-1,000,000,000 encoder counts. The input type of the 1756-M02AE module is an encoder input with incremental AB quadrature and a marker. The encoder mode has a 4X quadrature and a maximum encoder rate of 4 MHz counts per second.

This module has 5V or 24V position registration inputs. Its current draw is 700 mA at 5.1V DC and 2.5 mA at 24V DC with a module power of 3.63 W. The module’s power dissipation is 5.5 W and its electrical interference is 5V differential (optically isolated). It has an on-state voltage range of 3.4 to 5V and an off-state voltage range of 0 to 1.8V. It also has an optically-isolated, current sinking input type. Its nominal voltage is 24V DC. The on-state minimum voltage is 17V DC, the maximum on-state is 26.4V DC, and the maximum off-state voltage is 8.5V DC. The Allen-Bradley 1756-M02AE is Allen-Bradley’s solution for Analog Motion control requirements. This module is compatible for installation with any ControlLogix chassis and provides open-loop or closed-loop motion control. This module provides an analog output of +/-10VDC which is compatible for use with devices that receives +/- 10VDC as command reference for Velocity or Torque. This module is integrated with Two (2) axis however, a ControlLogix controller supports up to 32 axes which may be achieved by installing additional modules. The module’s receives an Incremental AB quadrature encoder with marker. The encoder mode is 4X quadrature with rate of 4MHz count per second. The discrete input channel of this module are optically isolated and support current sinking configuration. The nominal input voltage is 24VDC with minimum On state voltage of 17VDC and maximum On-state voltage of 26.4 VDC. The maximum Off state voltage is 8.5 VDC. The module’s servo output type is an analog voltage with range of +/- 10VDC with resolution of 16-bits. It is used as the module’s Velocity and Torque reference of a connected Servo drive. The discrete output channel of this module is a Solid-state, isolated relay contact output. The nominal operating voltage for the output is 24VDC with a maximum operating voltage of 26.4 VDC.

The company focuses on DCS, PLC, robot, large servo four systems

The main products are various modules/cards, controllers, touch screens, servo drivers Company advantage: Supply imported original products, professional production of spare parts One year warranty, fast delivery time, complete supply !！！ ① 24 hours email response (12 hours); ② For shipment outside Asia, please contact the seller.

Main brands include: ABB, Bailey, GE, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, EMERSON EMERSON, B&R, MOTOROLA, FUANC, REXROTH, KUKA, HONEYWELL, NI, DEIF, Yokogawa, WOODWARD WOODWARD, Ryan, SCHNEIDER SCHNEIDER, Yaskawa, MOOG, EPRO, PROSOFT and other major brands

Allen-Bradley Related Products

【 Disclaimer 】 We sell new products and discontinued products, independent channels to buy such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, dealer or representative of the products featured on this website. All product names/product images, trademarks, brands and microlabels used on this Website are the property of their respective owners. Descriptions, depictions or sales of products with such names/images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder. This article is from the official website of Guizhou Yuanmiao Automation Equipment Co., LTD. Please attach this link：http://www.ymdcs.com/Allen-Bradley/