1756-OF8H - Analog Output Module

1756-OF8H - Analog Output Module

Brand: Allen-Bradley

Product ID: 1756-OF8H

Condition: New / used

Terms of payment: Paypal、T/T 、Western Union

Category:

Description

Description: The 1756-OF8H is an analog output module that is part of Allen-Bradley’s Logix controller platform. This module features Eight (8) voltage or current output channels and One (1) Highway Addressable Remote Transducer (HART) modem. Each channel is configurable for 0-20 mA and 4-20 mA output current signals while configurable voltage output signals are +/-10 VDC. This module has a resolution of 15-16 bits for all ranges. This content was written and compiled by dosupply.com and should not be copied.


Technical Specifications for 1756-OF8H

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-OF8H
ManufacturerRockwell Automation
BrandAllen-Bradley
SeriesControlLogix
SeriesControlLogix
Module TypeHart Analog Output Module
Module TypeAnalog output Module with HART capability
Outputs8 Differential
No. of InputsEight (8) output channels
Input Current Range0-20 or 4-20 milliamps
Output signalCurrent: 0-20 mA; 4-20 mA Voltage: +/-10VDC
Isolation Voltage50 Volts Continuous
Resolution15-16 Bits
Overvoltage Protection24 Volts DC
AccuracyVoltage: 0.1% of range Current: 0.5% of range
EnclosureOpen
Removeable Terminal Blocks1756-TBNH, 1756-TBSH
Data Format:Integer mode (left justified, 2 s complement) IEEE 32-bit floating point
Input conversion methodSuccessive approximation
Output conversion methodR-Ladder DAC, monotonicity with no missing codes
Removable terminal block1756-TBCH; 1756-TBSH
Removeable Terminal Block(s)1756-TBNH, 1756-TBSH
Current Draw230 mA @ 5.1 VDC and 230 mA @ 24 VDC
Isolation Voltage50 Volts Continuous
EnclosureNone
Open circuit detection timeCurrent output only (output must be set to < 0.1 mA)
Overvoltage protection, max+/- 24 VDC

1756-EN2TR (2).jpg

The Allen-Bradley 1756-OF8H is an analog output module from the ControlLogix controller platform. This module mainly features Eight (8) voltage or current output channels, configurable for 0-20 mA and 4-20 mA current output signals and +/-10VDC voltage output signals. The 1756-OF8H has a module resolution of 15-16bits on all signal ranges. It comes with internal Digital to Analog converter (DAC) using R-Ladder DAC, monotonicity with no missing codes conversion method with data format of Integer mode (left justified, 2 s complement) IEEE 32-bit floating-point. This module is installed to a 1756 ControlLogix chassis and occupies a single slot only. It can function as a local IO module and remote I/O module component. For the termination of signal wires, this module comes with a removable terminal block (RTB). This RTB can be replaced with 1756-TBNH or 1756-TBSH with user-defined mechanical RTB keying. Applicable wire size when 1756-TBNH is used is 0.33-2.1 mm2 (22-14 AWG) for single-wire connection and 0.33…1.3 mm2 (22…16 AWG) for double wire connection. 1756-TBSH supports single wire connection only and is designed for wire 0.33…1.3 mm2 (22…16 AWG) wire size. The 1756-OF8H has a continuous isolation voltage rating of 50V. Module isolation is between output channels to backplane only. Each output channel does not come with individual isolation. Additionally, the module’s open circuit detection time is available for current configuration only while the maximum overvoltage protection is +/- 24 VDC. The 1756-OF8H ControlLogix Voltage/Current Analog Output Module by Allen-Bradley is an analog output module that has 8 voltage or current outputs with a single HART modem per module. It has a selectable voltage/current signal range of -10.4336-10.4336V and 0-21.2916mA. The 1756-OF8H has an overall output rating of +/- 10V or 0-20mA and a signal resolution of 15-16 bits for all ranges. It also has a backplane current draw of 230 mA @ 5.1 VDC and 230 mA @ 24 VDC, total backplane power of 6.54W. It has a thermal dissipation of 16.78 BTU/hr, and a power dissipation of 4.92W. The 1756-OF8H has an isolation voltage of 50V with basic insulation tested at 1500V AC for 60s between output channels and the backplane. The 1756-OF8H, unlike other Analog I/O modules, offers Open Circuit Detection and has a circuit detection time at a value that must be set below 0.1 mA. Its current settling time without HART is just below 23ms, and below 37ms with HART and its voltage settling time is 8.5ms to 95% with resistive loads. It has a calibration accuracy (without HART) of 0.1% (voltage) and 0.15% (current) and its standard calibration interval is about 12 months. The 1756-OF8H has an offset drift of 100 V/deg C. or 200nA/deg. C and the module has an overall module error of 0.15% (voltage) or 0.3% (current). It has a T4 North America, ATEX, and IEC temperature code, and has an open-style enclosure rating. The 1756-OF8H’s operational temperature ranges between 0 deg. C and 60 deg. C at 5-95% non-condensing relative humidity.

公司介绍 (1).png

The company focuses on DCS, PLC, robot, large servo four systems

The main products are various modules/cards, controllers, touch screens, servo drivers Company advantage: Supply imported original products, professional production of spare parts One year warranty, fast delivery time, complete supply !!! ① 24 hours email response (12 hours); ② For shipment outside Asia, please contact the seller.


Main brands include: ABB, Bailey, GE, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, EMERSON EMERSON, B&R, MOTOROLA, FUANC, REXROTH, KUKA, HONEYWELL, NI, DEIF, Yokogawa, WOODWARD WOODWARD, Ryan, SCHNEIDER SCHNEIDER, Yaskawa, MOOG, EPRO, PROSOFT and other major brands

公司介绍 (3).png

Allen-Bradley Related Products

1746-HSCE1756-A7
1746-HSRV1756-BA1
1746-IA161756-BA2
1746-IA81756-BATM
1746-IB161756-CNB
1746-IB321756-CNBR
1746-IV161756-DHRIO
1746-IV321756-DMD30A


【 Disclaimer 】 We sell new products and discontinued products, independent channels to buy such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, dealer or representative of the products featured on this website. All product names/product images, trademarks, brands and microlabels used on this Website are the property of their respective owners. Descriptions, depictions or sales of products with such names/images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder. This article is from the official website of Guizhou Yuanmiao Automation Equipment Co., LTD. Please attach this link:http://www.ymdcs.com/Allen-Bradley/

contact us