1771-OA | AC Output Module

Description

Description: The Allen-Bradley 1771-OA is an AC output module from the 1771 product bulletin. It has Eight (8) Discrete output channels that delivers 120VAC nominal output within voltage range of 95-132VAC, 47-63 Hz with continuous output current of 1.5 A per module. It is a single slot module that uses the 1771-WA Field Wiring Arm and directly installs to any 1771 I/O chassis.

Technical Specifications for 1771-OA

Manufacturer	Rockwell Automation
Brand	Allen-Bradley
Wiring Arm Screw Torque	7-9 inch-pounds
Field Wiring Arm	Cat. No. 1771-WA
Keying	Between 4 and 6; Between 12 and 14
Compatible chassis	1771 I/O chassis
Thermal Dissipation	3.4-36.6 BTU/hr
Power Dissipation	1.1-10.7 Watts
Output current rating per module	6 A
Output current rating per channel	1.5 A
Output Frequency	47-63 Hz
Operating Voltage Range	92 - 138VAC
No. of Inputs	Eight (8) outputs
Series	1771 Product Bulletin
Part Number/Catalog No.	1771-OA

Module Type	AC output module
Number of Outputs	8 Outputs
Voltage Category	120 Volts AC
AC Operating Voltage	92-138 Volts
Backplane Current	210 Miliamperes
Max Continuous Current Per Output	1.5 Amperes
Max Current Per Module	6 Amperes
Wiring Arm	1771-WA
Backplane Current	1.5 Amperes
Data Format	BDC or Natural Binary
Typical AC Signal Delay (Off)	45 (+/- 15) ms
Typical DC Signal Delay (Off)	50 ms
Wiring Arm	1771-WH
Mounting	Rack Mountable

The Allen-Bradley 1771-OA is an AC output module that is part of the 1771 product category. This module is an I/O module that is compatible for use with the PLC5 Programmable Logic Controllers (PLC). This module mainly features Eight (8) output channels that delivers voltage output range of 92-138VAC, 47-63 Hz. Each channel has an output current rating of 1.5 A however, the entire module does not exceed 6 Amperes. It has a surge current rating of 4 Amperes per output channel, capable of withstanding in 8.3 ms, repeatable every 1 second. This module has backplane current draw of 210 mA @ 5VDC. The 1771-OA can be used to energize electrical devices such as Solenoid actuated devices, Indicating lights and sounding devices like horn, buzzer and siren. With the capability to deliver AC voltage and provide 1.5 A output current, this module may also be used to energize panel components that are typically AC voltage operated such as magnetic contactors and relays. The 1771-OA is a single slot module the is mounted to any 1771 I/O chassis. It has an open type enclosure and uses the Field Wiring Arm with catalog number 1771-WA. Additionally, module keying is between 4 and 6 / 12 and 14. When connecting output devices to the module’s output channels, appropriate wire size for use ranges from 14-22 American Wire Gauge (AWG) with maximum insulation rating of 75 Deg. Celsius and maximum insulation thickness of 1.2 mm. This module comes with internally installed 2A, 250V Buss AGC2 fuse.

The device can be a motor starter, indicator, and solenoid motor; its output can drive the Allen-Bradley Size 4 starter motor, providing that the supply voltage does not drop below 92 Volts of AC power. The maximum load current that this unit can provide is 1.5 A per channel, not more than 6 A total per module. A power supply connected to the I/O backplane chassis is required to power the unit; it requires a maximum current of 210 mA at 5 Volts of DC power. The total requirements of this module are currently with other modules in the I/O chassis to avoid oversupply or rear axis I/O chassis. The 1771-OA has eight fluorescent status indicators that show the state of each output. These indicators light up when the appropriate output is energized. It also has an indicator that displays the fuse condition that is blown at each output regardless of the output state. This indicator is powered by the power supply of the user's device. The Output Voltage Range of this unit ranges between 92 and 138 Volts of AC at 47 to 63 Hertz while its output current rating is 1.5 A per output. This unit can handle a maximum surge current of 4 A per output for 8.3 milliseconds at 120 Volts AC. Its "on" state Voltage drop at 100 mA is 2 Volts. Its maximum "off" state leakage current at 120 Volts AC is 5 mA per output. Do not disconnect this module unless power has been switched off.

The company focuses on DCS, PLC, robot, large servo four systems

The main products are various modules/cards, controllers, touch screens, servo drivers Company advantage: Supply imported original products, professional production of spare parts One year warranty, fast delivery time, complete supply !！！ ① 24 hours email response (12 hours); ② For shipment outside Asia, please contact the seller.

Main brands include: ABB, Bailey, GE, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, EMERSON EMERSON, B&R, MOTOROLA, FUANC, REXROTH, KUKA, HONEYWELL, NI, DEIF, Yokogawa, WOODWARD WOODWARD, Ryan, SCHNEIDER SCHNEIDER, Yaskawa, MOOG, EPRO, PROSOFT and other major brands

【 Disclaimer 】 We sell new products and discontinued products, independent channels to buy such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, dealer or representative of the products featured on this website. All product names/product images, trademarks, brands and microlabels used on this Website are the property of their respective owners. Descriptions, depictions or sales of products with such names/images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder. This article is from the official website of Guizhou Yuanmiao Automation Equipment Co., LTD. Please attach this link：http://www.ymdcs.com/Allen-Bradley/