Description
The ABB LD800HSE 3BSE073314R1 is a Foundation Fieldbus Link Device, mainly used in the field of industrial automation, serving as a gateway between the field devices of the H1 link and the HSE subnet. The following is a detailed description of it: Functional Features: Compliance with FF HSE Profile: Registered according to the HSE profile at Level 42c, it can identify the devices connected to the H1 link. System management and network management can be carried out through the HSE to configure the connected H1 devices. It can also access the function blocks of the connected H1 devices through the HSE. Data Publication and Distribution: It can republish the process data between the H1 links, republish the process data of the H1 to the HSE, and vice versa. At the same time, it distributes the alarms and events sent by the H1 devices. Time Synchronization: Time synchronization is achieved through SNTP, and the IP address can be configured through the integrated network server. Technical Parameters: Power Supply: The power supply voltage is 24V DC (±20%), the typical current consumption is 200mA, and the power dissipation is approximately 4.8W. Mechanical Characteristics: The dimensions are (Length × Height × Width) 47×131×111 mm, and the weight is approximately 0.4 kilograms.
The installation steps for the ABB LD800HSE 3BSE073314R1 are as follows: Preparation before Installation Check the appearance of the module for any signs of damage, deformation, or missing components. Ensure that the installation environment meets the requirements. Select a location that is free from corrosion, flammable and explosive gases and liquids, and dust. The surrounding humidity should not exceed 90% without condensation. The ambient temperature should be between 0°C and +55°C. The installation position should be vibration - free and convenient for maintenance and operation. Prepare the necessary tools, such as screwdrivers. Make sure that a 24V DC power supply is available, with an allowable voltage fluctuation range of ±20%. Install the Module This module is designed for DIN - rail installation. First, fix the DIN rail properly. Inspect the module to ensure it is in a powered - off state and there are no connected cables or other devices. First, snap the upper half of the module's rail clip (the part with the spring clip) onto the rail bar, and then gently force the lower half into the rail bar to firmly install the module on the DIN rail. Connect the Cables Connect the 24V DC power supply to the module's power terminals, ensuring that the positive and negative poles are correctly connected. According to the actual application requirements, connect the cables of the H1 link to the H1 ports of the module. Usually, three - pole screw terminals are used for connection. Pay attention to tightening the screws to ensure a reliable connection. If an Ethernet connection is required, use an RJ45 Ethernet cable to connect the module's Ethernet port to the corresponding network devices, such as switches or routers. Configuration and Testing Configure the network parameters such as the IP address of the module through the integrated network server so that it can communicate with other devices in the network.
Main brands include: ABB, Bailey, GE, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, EMERSON EMERSON, B&R, MOTOROLA, FUANC, REXROTH, KUKA, HONEYWELL, NI, DEIF, Yokogawa, WOODWARD WOODWARD, Ryan, SCHNEIDER SCHNEIDER, Yaskawa, MOOG, EPRO, PROSOFT and other major brands
[Disclaimer]
Guizhou Yuanmiao Automation Equipment Co., LTD. We sell new products and discontinued products, independent channels to purchase such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products on this website. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Descriptions, descriptions or sales of products bearing these names, pictures, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder.
This article is from the official website of Guizhou Yuanmiao Automation Equipment Co., LTD. Please attach this link: http://www.ymdcs.com/ABB
